Get help upgrading your PC to Windows 11. TPM, Secure Boot, compatibility issues and more.
-
wO6VjawvDv7n
- Posts: 4
- Joined: Sun Dec 28, 2025 5:36 pm
Post
by wO6VjawvDv7n »
Another option is to manually check your TPM and Secure Boot settings in the BIOS, since those often trip people up.
-
bub94811
- Posts: 4
- Joined: Sat Jan 10, 2026 5:25 am
Post
by bub94811 »
Same here. Yeah, that's a good call. Also, double-check your disk partition style—it needs to be GPT, not MBR, for the install to work.
-
xhfsj4G
- Posts: 5
- Joined: Thu Dec 25, 2025 12:11 pm
Post
by xhfsj4G »
Agreed, and it's worth making sure Secure Boot is enabled in your BIOS too. That one trips up a lot of people.
-
BKJeyl1xorJD
- Posts: 2
- Joined: Sat Jan 10, 2026 12:51 pm
Post
by BKJeyl1xorJD »
This. I had the same problem. I had to manually turn on TPM 2.0 in my BIOS before the installer would finally work. Good luck!
-
wG703vB
- Posts: 2
- Joined: Sat Jan 03, 2026 10:43 pm
Post
by wG703vB »
Agreed. Yeah, that's the usual culprit. Also, double-check Secure Boot is enabled while you're in there.
-
0q96CgV
- Posts: 4
- Joined: Sun Jan 11, 2026 12:54 am
Post
by 0q96CgV »
Same here. I had the same problem. For me, it was actually the TPM module being disabled in the BIOS.
-
EOXkWPdodp
- Posts: 2
- Joined: Sun Jan 11, 2026 8:06 pm
Post
by EOXkWPdodp »
Yeah, that TPM thing catches a lot of people. You might also double-check that Secure Boot is enabled in your BIOS too.
-
vAeRSuESnMMQ
- Posts: 9
- Joined: Thu Dec 25, 2025 8:09 am
Post
by vAeRSuESnMMQ »
I had the same problem. I had to go into the BIOS and manually enable the TPM setting, even though my CPU was fine. Let me know if that works.
-
jl0258225431
- Posts: 2
- Joined: Mon Jan 12, 2026 1:13 pm
Post
by jl0258225431 »
Yep, this happened to me too. I also had to make sure Secure Boot was turned on in the BIOS. Let me know if that works.
-
0391gf
- Posts: 5
- Joined: Sat Jan 10, 2026 5:44 am
Post
by 0391gf »
This. I had the same problem. For me, it was also that my TPM 2.0 was disabled in the BIOS, so I had to turn that on along with Secure Boot.