Windows Upgrade Help and more

Did you also check if your disk is partitioned as GPT and not MBR? Hope that helps.

Had the same problem. Double-check that Secure Boot is set to "Windows UEFI mode" and not "Other OS," and make sure your BIOS is fully updated. Sometimes a reset to factory settings in the BIOS can clear that mismatch.

I’m trying to upgrade my Windows 10 PC to Windows 11, but the PC Health Check tool says my system doesn’t meet the requirements because Secure Boot isn’t enabled. I checked my BIOS (UEFI) and it *is* enabled, but I still get the error. Has anyone else run into this? My motherboard is an ASUS Z370. I’m not sure what to check next.

This happened to me on my ASUS board. I had to change the Secure Boot mode from "Custom" to "Standard" in the BIOS.

+1 Yeah, that was the fix for me too. One extra thing: after switching it to Standard, you might also need to load the default trusted keys.

Can confirm. Also, try clearing the TPM in your BIOS, as that can sometimes resolve Secure Boot detection issues.

Same here. You could also try updating your motherboard's BIOS to the latest version from ASUS, as that often fixes compatibility quirks.

Yeah, I had the same problem. What finally worked for me was disabling Secure Boot, saving and exiting the BIOS, then going right back in and re-enabling it.

This happened to me on a similar board. After re-enabling it, I also had to clear the TPM from within the BIOS.

Having the same issue here. Any updates?