Windows Upgrade Help and more

Yeah this is common. I had this exact issue with my ASUS board. From what I have seen, sometimes you also need to enable TPM 2.0 separately, even if Secure Boot is on. I’d double-check that setting in your BIOS under a security or advanced menu.

I’m trying to upgrade my Windows 10 PC to Windows 11, but the PC Health Check app says my system doesn’t meet the requirements because Secure Boot isn’t enabled. I checked my BIOS (UEFI) and it *is* enabled, but I still get the error. Has anyone else run into this? My motherboard is an ASUS Z370. I’m not sure what to check next.

Have you also verified that your disk is using the GPT partition style and not MBR? Good luck!

Also, is TPM 2.0 enabled and showing as ready in the TPM Management console?

Same here. Agreed, it's a common headache. Sometimes you also need to enable the TPM setting separately in the BIOS, even if Secure Boot is on.

Same here! Thought it was just me.

You could also try clearing the TPM in your BIOS, as that sometimes resolves the Secure Boot detection issue.

You could also try clearing your TPM from within the BIOS, as that sometimes resolves the Secure Boot detection issue.

+1 Also, make sure your BIOS is fully updated, as older versions on that board can sometimes cause this mismatch. Good luck!

Agreed, that reset can help. Also, make sure your BIOS is fully up to date, as an older version on that board can sometimes cause this mismatch. Let me know if that works.