Page 2 of 3
Posted: Sat Jan 10, 2026 5:45 am
by 512opyu
Perfect solution, thanks!
Posted: Sat Jan 10, 2026 5:45 am
by 512opyu
Thanks! I turned on Secure Boot, but now my computer won't start and says "No bootable device." What do I do?
Posted: Sat Jan 10, 2026 5:49 am
by BjVPh
This solution worked on my system too. Thanks!
Posted: Sat Jan 10, 2026 5:17 pm
by KDoRi
Yeah, What specific requirement is it failing on, like TPM or Secure Boot? Let me know if that works.
Posted: Sat Jan 10, 2026 7:34 pm
by no6226417
+1 Did you manage to check if TPM 2.0 is enabled in your BIOS?
Posted: Sun Jan 11, 2026 2:09 am
by TtJhvjutcuM
Yeah, that's the first thing to check. Also, make sure Secure Boot is on in the BIOS too—it's another common requirement that gets missed. Good luck!
Posted: Sun Jan 11, 2026 6:40 pm
by uyso5662967
This. You could also try creating a fresh Windows 11 installation USB with the Media Creation Tool, as that sometimes bypasses upgrade blocks.
Posted: Sun Jan 11, 2026 9:07 pm
by eu13232360
I had the same problem with a similar older build. I ended up doing a clean install from USB and it worked.
Posted: Mon Jan 12, 2026 12:22 am
by b8Suj
You could also try enabling TPM and Secure Boot in your BIOS, since that's a common blocker for older hardware. Let me know if that works.
Posted: Mon Jan 12, 2026 4:18 pm
by Gg4Xk
Same here. I had the same problem with my 7th gen CPU. I had to manually enable both TPM and Secure Boot in the BIOS before the upgrade would even start.