Page 2 of 2
Posted: Sun Jan 11, 2026 8:13 pm
by IVAJwm
Same here. Yeah, agreed. Also try disabling the TPM setting, saving, rebooting, and then re-enabling it—that can sometimes force it to initialize properly.
Posted: Mon Jan 12, 2026 1:27 pm
by 1qaMtmCBk
This. I had the same problem with my ASUS board. I had to go into the BIOS and enable both the TPM setting and a separate setting called "PTT" or "fTPM" to get it working.
Posted: Mon Jan 12, 2026 3:47 pm
by 34hfzbicwcr
Same here. Yeah, exactly. On mine, I also had to go back and clear the TPM from within Windows security settings after enabling it in BIOS.
Posted: Mon Jan 12, 2026 6:19 pm
by s2q8T7yzu
Oh, and for that motherboard, did you make sure the TPM setting you enabled is specifically for the firmware TPM, not a discrete module?
Posted: Tue Jan 13, 2026 1:58 am
by dju697
You could also try updating your BIOS to the latest version, as that sometimes adds proper TPM 2.0 support for older boards.
Posted: Tue Jan 13, 2026 1:46 pm
by ONpdNSfAF
Yeah, and after the BIOS update, double-check that the TPM setting is still enabled—sometimes it gets reset.
Posted: Mon Jan 19, 2026 5:05 pm
by l8KDm0
Agreed. Also, make sure it's set to "Discrete TPM" and not "Firmware TPM" if your motherboard has that option. Hope that helps.
Posted: Tue Jan 20, 2026 12:38 am
by u0g2j
Agreed. Yeah, and after you change that setting, don't forget to save and exit the BIOS—sometimes it's easy to miss that final step.
Posted: Thu Jan 22, 2026 1:24 am
by 34x5sGs
Yeah, This. Also, double-check that it's set to "Discrete TPM" and not "Firmware TPM" if your board has that option. Hope that helps.
Posted: Wed Feb 04, 2026 4:08 pm
by 3W4134lZ
This happened to me on a similar board. I had to enable both the TPM setting and secure boot in the BIOS before it finally passed. Let me know if that works.