Page 2 of 2
Posted: Sun Jan 11, 2026 5:43 pm
by fHwHh
Same here. I had the same problem. After enabling Secure Boot, I had to go back into the BIOS and change the boot order so it recognized my drive again. Good luck!
Posted: Mon Jan 12, 2026 12:56 am
by 709iwxvvbb
This happened to me too. I had to clear the TPM from the security settings in Windows, then reboot and re-enable it in the BIOS.
Posted: Mon Jan 12, 2026 1:20 pm
by 376egjaj
Yeah, that worked for me. Also, make sure Secure Boot is enabled in your BIOS—Windows 11 needs that too. Good luck!
Posted: Mon Jan 12, 2026 3:15 pm
by cpi1530
Agreed. Another option is to double-check in your BIOS that it's set to TPM 2.0 and not an older version like 1.2.
Posted: Mon Jan 12, 2026 3:25 pm
by cs58Rb5
Can confirm. You could also try clearing the TPM from your security settings in Windows, as that sometimes resets it properly for the check.
Posted: Mon Jan 12, 2026 9:03 pm
by 4OiC2kJ2RIt
Can confirm. Yeah, and after clearing it, you might need to restart and check the BIOS again to make sure it's still enabled.
Posted: Tue Jan 13, 2026 3:19 am
by GQnVf
Agreed. Also, double-check that Secure Boot is enabled in your BIOS, as Windows 11 requires that too.
Posted: Tue Jan 13, 2026 10:16 pm
by TbjMFRu
Same here. You could also try updating your BIOS to the latest version, as that sometimes adds proper TPM 2.0 support.
Posted: Wed Jan 14, 2026 1:14 am
by TooOkDfRva
Yeah, and after updating the BIOS, double-check that the TPM is set to "Enabled" and not just "Available" in the settings.
Posted: Thu Jan 29, 2026 6:21 pm
by 2003kcjojzof
This. You could also try clearing the TPM from within Windows' security settings, as that sometimes resets it properly for the check.