Get help upgrading your PC to Windows 11. TPM, Secure Boot, compatibility issues and more.
KNxMWfIW
Posts: 2 Joined: Sun Jan 11, 2026 8:04 pm
Post
by KNxMWfIW » Mon Jan 12, 2026 12:53 am
You could also check if there's a BIOS update for your motherboard, as that sometimes adds TPM support for older chips.
tPNDoWDJUmUB
Posts: 1 Joined: Sat Jan 10, 2026 9:31 pm
Post
by tPNDoWDJUmUB » Mon Jan 12, 2026 2:09 am
Yeah, and after the BIOS update, did you specifically find and enable the fTPM setting?
hlvl21194138
Posts: 1 Joined: Sun Jan 11, 2026 11:47 pm
Post
by hlvl21194138 » Mon Jan 12, 2026 6:58 pm
Yeah, and once you enable fTPM, you might need to also turn off any compatibility mode settings like CSM in the BIOS.
55wia
Posts: 2 Joined: Sun Jan 11, 2026 5:01 pm
Post
by 55wia » Thu Jan 15, 2026 10:20 pm
Agreed, and after you save those BIOS changes, give your PC a full restart before trying the upgrade again—sometimes it just needs a clean boot to recognize the new settings. Hope that helps.
0588ceP5f991
Posts: 4 Joined: Thu Jan 01, 2026 4:09 am
Post
by 0588ceP5f991 » Tue Jan 20, 2026 12:36 am
You could also try using the Windows 11 Installation Assistant tool from Microsoft's website, as it sometimes bypasses the standard upgrade blocks. Hope that helps.
hz60720
Posts: 2 Joined: Sun Jan 11, 2026 2:35 am
Post
by hz60720 » Tue Jan 20, 2026 10:49 pm
This. I had the same problem with my older Ryzen. I had to manually enable both fTPM and Secure Boot in the BIOS for it to finally work.